The gunslinger (outlaws of the west) 1:6 scale figure ? limtoys

[The Rogster]

Loving this guy! A couple more shots

 

[MateriaHunter]

Diorama ideas...

While a secondary choice would be an outdoor desert setting with a cactus and boulder or two, an indoor or storefront from the game would be fun.

View attachment 546932

For manufactured ones, the Boonetown one from 2012 is sadly no longer around.

View attachment 546927 View attachment 546928

But the Haberdashery door one can still be found if you look hard enough. Both Boonetown and Haberdaskery are at least an inch taller than the default Detolf shelf height however. The stove pipe in Haberdashery set was not included in the final product.

View attachment 546929View attachment 546930

Or perhap repurpose a middle-eastern set to be a Mexico Adobe spot?

View attachment 546933


Has anyone else thought of settings? Maybe a winter one? Is there a particular location in the Red Dead game that would be something everyone would be interested in?

Just thought I would share my own, I made my own diorama, the Cacti were available from Amazon fairly cheap, and you can buy scale wargaming (i.e. Warhammer) roll out sheets for the base and enhance with miniature rubble and sand.

 

[Asta]

Just thought I would share my own, I made my own diorama, the Cacti were available from Amazon fairly cheap, and you can buy scale wargaming (i.e. Warhammer) roll out sheets for the base and enhance with miniature rubble and sand.

Looks great!

The cacti were an interesting acquisition.

 

[Stryker2011]

Now if someone would just make Western tack to go with these horses, instead of the same modern style used with the Hanoverians.

 

[Rydeck]

Now if someone would just make Western tack to go with these horses, instead of the same modern style used with the Hanoverians.

Ben's Custom Tack

 

[Stryker2011]

Ben's Custom Tack

I tried reaching out to them through their site almost two months ago and they never replied. I plan to try again, but that seems pretty ****** to not get back to someone willing to spend close to $300 for their stuff. Pretty bad customer service in my view.

 

[Asta]

Received the replacement part from Kit a little while ago.

I was only expecting the missing cylinder from the Colt, but actually received a complete Colt!


Something I didn't realise until I saw it on Facebook the other day (can't remember where), is that the loading gate opens on the Colt too.

 

[WhoaItsJBot]

I messaged TNS a few days ago politely asking when they expect to start shipping this and still haven't received a response.

I'd get my money back if I could and order elsewhere, but I can only imagine the hassle that would be.

 

[Monsterjo5748]

Received the replacement part from Kit a little while ago.

I was only expecting the missing cylinder from the Colt, but actually received a complete Colt!


Something I didn't realise until I saw it on Facebook the other day (can't remember where), is that the loading gate opens on the Colt too.

We're you given a tracking number for it asking cause I'm waiting on the same thing but mine is from giantoy

 

[Asta]

We're you given a tracking number for it asking cause I'm waiting on the same thing but mine is from giantoy

Yes, Kit sent it as if it were a normal order.

He even added one of his new scratch cards which grants reward points.

 

[Monsterjo5748]

Yes, Kit sent it as if it were a normal order.

He even added one of his new scratch cards which grants reward points.

That's dope I probably try his site in the future

 

[DGSimo]

Out for delivery! 2 and a half years and now down to waiting a few hours!

 

[cbulas1]

Out for delivery! 2 and a half years and now down to waiting a few hours!

Me too! It seemed like our KG orders were side by side from HK this whole time and it appears that was indeed the case.

Over the weekend I built another bookshelf for my theater room that I plan to display my Arthur on- can't wait to get him!

 

[cbulas1]

Just thought I would share my own, I made my own diorama, the Cacti were available from Amazon fairly cheap, and you can buy scale wargaming (i.e. Warhammer) roll out sheets for the base and enhance with miniature rubble and sand.

This is easily my favorite Arthur set-up I've seen yet- well done!

Am I correct in assuming that is a Mr. Z horse? Did you add a couple of pieces to the horse tack yourself?

 

[kirklazarus]

Has anyone made a poseable horse 1/6 yet? For something like bending the head down to the ground or turning it or the at the waist?

 

[Cammo]

I just received my mid-beard headsculpt which was nicely packed and in a plastic bag. But I also got this black peg or plug that doesn't seem to fit my inner headsculpt. It was loose in the foam-box. Any idea what it's for? I haven't received my figure yet so I don't know if my headsculpt will fit on it or not.

 

[Asta]

I just received my mid-beard headsculpt which was nicely packed and in a plastic bag. But I also got this black peg or plug that doesn't seem to fit my inner headsculpt. It was loose in the foam-box. Any idea what it's for? I haven't received my figure yet so I don't know if my headsculpt will fit on it or not.

It should fit. It plugs onto the peg that's in the neck of the figure. Align it so that one of the jutting out ends points towards the front of the sculpt.

The caps that come with the actual figure have writing and an arrow on them.

 

[Cammo]

It should fit. It plugs onto the peg that's in the neck of the figure. Align it so that one of the jutting out ends points towards the front of the sculpt.

The caps that come with the actual figure have writing and an arrow on them.

I need to push that black peg all the way down in the sculpt? No way that black peg fits into the headsculpt. :s

 

[Asta]

I need to push that black peg all the way down in the sculpt? No way that black peg fits into the headsculpt. :s

It's best to wait until you have the figure, then plug it onto the neck peg. The fit is pretty tight, so pushing the head down onto the neck peg is easier.

I have that blank black cap here now with a sculpt. I've pushed it down inside with my finger and there's about 4mm of the narrow 'tube' showing. I don't know how far it should be, as you can only judge that by putting it on the body.

 

[Godfather1408]

I messaged TNS a few days ago politely asking when they expect to start shipping this and still haven't received a response.

I'd get my money back if I could and order elsewhere, but I can only imagine the hassle that would be.

TNS have started shipping mine shipped from them last Monday.