Crimsonbob
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW Daryl Bandanas!
I got my decal and nameplates today thanks again Chris
I got my decal and nameplates today thanks again Chris
Corrose's Workshop - 1/6 Scale Custom Accessories - OPEN FOR COMMISSIONS!
- Thread starter Corrose
- Start date
Help Support Collector Freaks Forum:
bruhkis
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW Daryl Bandanas!
just saw the bandana....Please put me down for one...Thanks
just saw the bandana....Please put me down for one...Thanks
elar
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW Daryl Bandanas!
Wow, that is amazing! One day - idea, second - realization! You are really fast, man!
Wow, that is amazing! One day - idea, second - realization! You are really fast, man!
armysoldier74b
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW Daryl Bandanas!
Its what I love about this hobby. Turning ideas into reality
Its what I love about this hobby. Turning ideas into reality
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW Daryl Bandanas!
Which is exactly the opposite of how this hobby usually works!
The hankie looks great, Corrose! Please add me to the list! (Especially if you're thinking of maybe dirtying it up a bit. Nothing ever stays clean on a Dixon!)
Which is exactly the opposite of how this hobby usually works!
The hankie looks great, Corrose! Please add me to the list! (Especially if you're thinking of maybe dirtying it up a bit. Nothing ever stays clean on a Dixon!)
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW Daryl Bandanas!
Really awesome work Chris! Those bandanas came out perfectly! Now I got some project ideas with you in mind.
Really awesome work Chris! Those bandanas came out perfectly! Now I got some project ideas with you in mind.
Corrose
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW Daryl Bandanas!
Ok everyone, very excited with the final on these. I bought a few blank, black bandanas this morning. This material as you know is much, much thinner than a cotton shirt which works perfect for this project. It allows it to bunch up nicely around the bottom.
The actual prints are done on a professional quality roland heat transfer material using solvent inks. This is the same process a shirt shop would use for shirt runs where silk screening is not needed.
I permanently pressed the transfers onto the material using the same kind of heat press that shirt shops use, the bond is permanent and bubble free. The transfer material, even when applied to a garment can be stretched with the fabric and will not crack or tear. I have been able to stretch an applied transfer to around 3x it's original size with no issues, it's top shelf stuff.
I did a small run tonight and wanted to share the pricing and ordering information.
The price per bandana is: $30 shipped worldwide and includes paypal fees. My paypal is: [email protected]
The included shipping is going to be your basic, postal option, no tracking etc. If this is something you need expedited, that will be a fee you are responsible for.
Since these are ready to go, there is no need for a formal sign up list. Feel free to go ahead and make a payment. If you want to avoid shipping delays, please make sure your board name and correct shipping info is included in the paypal transaction.
There are 2 options you guys can ask for on these:
1) Shipped flat and unfolded
2) Permanent press crease (see images). This is nice because you won't have to pinch your folds by hand.
Your folding option must be indicated in your payment notes, otherwise you will be shipped an unfolded version.
All you will need to do is twist the edges and tie a small knot around the back of the head. If your figure head is any larger than Arnie here you can easily stretch the bandana out a little to give some more reach. It helped me to use needle nose pliers to tighten the back.
The edges are not hemmed, I wanted these to have the ability to fray a little bit. When they arrive, there will be little to no fray, as they are brand new. With some handling you can get that nice natural fray to start to show.
As mentioned these are in hand and can ship in less than 24 hours of payment received.
There is no need to PM me prior to ordering, just go for it. If you have any questions just let me know.
Thanks!
Ok everyone, very excited with the final on these. I bought a few blank, black bandanas this morning. This material as you know is much, much thinner than a cotton shirt which works perfect for this project. It allows it to bunch up nicely around the bottom.
The actual prints are done on a professional quality roland heat transfer material using solvent inks. This is the same process a shirt shop would use for shirt runs where silk screening is not needed.
I permanently pressed the transfers onto the material using the same kind of heat press that shirt shops use, the bond is permanent and bubble free. The transfer material, even when applied to a garment can be stretched with the fabric and will not crack or tear. I have been able to stretch an applied transfer to around 3x it's original size with no issues, it's top shelf stuff.
I did a small run tonight and wanted to share the pricing and ordering information.
The price per bandana is: $30 shipped worldwide and includes paypal fees. My paypal is: [email protected]
The included shipping is going to be your basic, postal option, no tracking etc. If this is something you need expedited, that will be a fee you are responsible for.
Since these are ready to go, there is no need for a formal sign up list. Feel free to go ahead and make a payment. If you want to avoid shipping delays, please make sure your board name and correct shipping info is included in the paypal transaction.
There are 2 options you guys can ask for on these:
1) Shipped flat and unfolded
2) Permanent press crease (see images). This is nice because you won't have to pinch your folds by hand.
Your folding option must be indicated in your payment notes, otherwise you will be shipped an unfolded version.
All you will need to do is twist the edges and tie a small knot around the back of the head. If your figure head is any larger than Arnie here you can easily stretch the bandana out a little to give some more reach. It helped me to use needle nose pliers to tighten the back.
The edges are not hemmed, I wanted these to have the ability to fray a little bit. When they arrive, there will be little to no fray, as they are brand new. With some handling you can get that nice natural fray to start to show.
As mentioned these are in hand and can ship in less than 24 hours of payment received.
There is no need to PM me prior to ordering, just go for it. If you have any questions just let me know.
Thanks!
Last edited:
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW Daryl Bandanas!
money in the kitty!
thanks...
money in the kitty!
thanks...
CTO15
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW Daryl Bandanas!
payment sent
payment sent
Corrose
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW DARYL BANDANAS!
All payments received, thanks!
All payments received, thanks!
galactiboy
OT Preferist
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW DARYL BANDANAS!
Those bandanas are sweet
Those bandanas are sweet
Neil the Hat
Freakalicious
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW DARYL BANDANAS!
Hi Chris, sent you an email about some other items along with the bandana... makes sense to order a few items together as I'm in the UK, thanks.
Hi Chris, sent you an email about some other items along with the bandana... makes sense to order a few items together as I'm in the UK, thanks.
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW DARYL BANDANAS!
did you need payment before starting my decal ?
did you need payment before starting my decal ?
Corrose
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW DARYL BANDANAS!
No you can do it all together, Im sending you a PM in just a sec.
Thanks
No you can do it all together, Im sending you a PM in just a sec.
Thanks
Terminator_Fan_Game
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW DARYL BANDANAS!
Awesome bandana! Perfect timing too, since I was searching ebay yesterday with no luck.
I just sent payment for a Flat & Unfolded bandana.
Awesome bandana! Perfect timing too, since I was searching ebay yesterday with no luck.
I just sent payment for a Flat & Unfolded bandana.
Corrose
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW DARYL BANDANAS!
All orders have shipped, thanks guys! I still have a couple left in the in-stock batch that can go out right away, just let me know.
On a super-duper fantastic note, I got word yesterday that the 3D printer will ship most likely this coming week. Shipping will take about a week, and then I have a 2 day scheduled training to go over some of the advanced features, calibration etc. I'm thinking I could possibly be up and running fully within a few weeks!
I will compose a more comprehensive post after I am in full 3D print mode giving you guys an outline of what I want to try to do for the community. As I have discussed with some of the customizers here, me making this purchase is not about squeezing myself in and others out. I do plan on offering printing services for my own projects as well as other digital sculptors who are looking for high resolution mold masters.
So hold off on your requests until I'm all set, but I think this is going to be very exciting for me, and hopefully you guys are going to dig a lot of what I will be working on. It's going to be a wide gamut from custom bases, to headsculpts, 1/6 accessories and much more!
All orders have shipped, thanks guys! I still have a couple left in the in-stock batch that can go out right away, just let me know.
On a super-duper fantastic note, I got word yesterday that the 3D printer will ship most likely this coming week. Shipping will take about a week, and then I have a 2 day scheduled training to go over some of the advanced features, calibration etc. I'm thinking I could possibly be up and running fully within a few weeks!
I will compose a more comprehensive post after I am in full 3D print mode giving you guys an outline of what I want to try to do for the community. As I have discussed with some of the customizers here, me making this purchase is not about squeezing myself in and others out. I do plan on offering printing services for my own projects as well as other digital sculptors who are looking for high resolution mold masters.
So hold off on your requests until I'm all set, but I think this is going to be very exciting for me, and hopefully you guys are going to dig a lot of what I will be working on. It's going to be a wide gamut from custom bases, to headsculpts, 1/6 accessories and much more!
Terminator_Fan_Game
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW DARYL BANDANAS!
Awesome! Cant wait to receive it!
And I wish I could afford a 3D printer and have a work room to put it in.
How much did it cost you, if you dont mind me asking?
Maybe you could print us out some 3D printers!
Awesome! Cant wait to receive it!
And I wish I could afford a 3D printer and have a work room to put it in.
How much did it cost you, if you dont mind me asking?
Maybe you could print us out some 3D printers!
Levit05
Super Freak
Re: Corrose's Workshop - Base Decals, 1/6 Custom Replicas - NEW DARYL BANDANAS!
this is exciting to hear Chris!!!!...can't wait to see what is in store!!!!...not to mention...the possibilities that will come knowing we have someone on our end (US) to have a quicker turn around time!!!!
this is exciting to hear Chris!!!!...can't wait to see what is in store!!!!...not to mention...the possibilities that will come knowing we have someone on our end (US) to have a quicker turn around time!!!!
Similar threads
