robbiethepainter
Super Freak
Mine is bought and paid for so if I cancel now im going get charged. Ill roll the dice and see what happens. If it leaks then ill send it back.
Belt: The reason HT didn't do this originally is that Cyanoacrylate glue (crazy glue/super glue) gives off a gas which leaves a white residue on dark surfaces. This fades over a short period of time (days). But it would mark the black rubber suit, unless they left it dry. HT does use Cyanoacrylate glue, but only in areas mostly obscured. Look at the gauntlets of some of the Batman releases and you will see the white powdery residue. Time is money, and sticky tape is faster.
After you use a tube of Cyanoacrylate glue, put it into a clear plastic pouch (like one of the ones you get when you buy 1/6th bits on ebay).Why? It's just a tiny dab behind the magnet. When I pressed the magnet in place, no glue seeped out. And I put the belt on almost immediately.
After you use a tube of Cyanoacrylate glue, put it into a clear plastic pouch (like one of the ones you get when you buy 1/6th bits on ebay).
seal it. Now check back in a day and you will see the inside of the bag will have gone white. You see it's not the actual dab of glue that's the problem, it releases an invisible gas as it dries. This crystalizes as a white residue. This affects the surrounding area of a glue spot. Just something to be careful off thats all. All Cyanoacrylate glues do it. Sometimes days later.
So, again, why not just glue the magnet into the belt while gluing the suit closed?
It takes like, what, half a second to poke a dot of glue in the cavity and pop the magnet in? I'd argue that's considerably more time efficient and cost effective than pulling off tape strips and taping the magnets into place.
So, again, why not just glue the magnet into the belt while gluing the suit closed?
It takes like, what, half a second to poke a dot of glue in the cavity and pop the magnet in? I'd argue that's considerably more time efficient and cost effective than pulling off tape strips and taping the magnets into place.
I would agree. HT isn't using super glue on these figures so there would be no clouding.
I agree Nam, it's just the fastest type of glue (this is all about time and money) would be a crazy glue, no setting time. I can't imagine even HT closing a belt with wet glue inside. Though I may be wrong about that!So, again, why not just glue the magnet into the belt while gluing the suit closed?
It takes like, what, half a second to poke a dot of glue in the cavity and pop the magnet in? I'd argue that's considerably more time efficient and cost effective than pulling off tape strips and taping the magnets into place.
That's pretty ____ if you ask me. Why not give you your deposit back? it's not as if they are going to be left with unsold stock. Unless an oil scandal hits of course...So i've contacted Wai Man at OSB (onesixthbruce) to cancel my order. Long story short, they have contacted their suppliers who claim that there have been 'no reports from anyone regarding leaking of oil on the 89 Batman.'
Therefore, not refunding my deposit... I have replied explaining that this was the same situation with the DX02 and the problem started showing up over time. Let's see how they respond.
Needless to say I will be very disappointed if I am not given a refund here.
I see what you did there.
At the end of the day (much as I hate that phrase) I want an 89 Batman. If it has to be a leaker thats a shame but I'm still going to own it. I personally would rather that than nothing. I may be bending over and taking penetration from HT but if you're going to make exception on anything surely its the 89 Batman. I apologise to the guys who wish everyone would stand and make a point by not buying.
Quick update: Still no oil residue on the figure, but my 'nads have started to shrink.
As kind as your apology is, I don't think you should have to justify keeping something you want and like just because there may be a QC issue. Just the same as those having problems should be able to be unhappy if they want. Thats totally each individuals call. I have one that is not leaking now, and LOVE IT. If it starts leaking, I'd try my best to deal with the leak. But thats not going to stop me from still loving it.
And I can't imagine Rory or any one else with leaks will begrudge anyone still being happy with their 89 bats. Just like we feel bad for everyone having leakage issue.
Enter your email address to join: