jaztermareal
Super Freak
- Joined
- Mar 5, 2011
- Messages
- 1,865
- Reaction score
- 2,153
Thought I would start a thread compiling my 3D printable files for 1:6 figures that I have available free at places like Thingiverse and Printables.
My first models when I started out (due to basically knowing nothing about CAD/Digital modelling were mostly made by mixing existing parts together or adjusting the proportions of existing model such as the knee, belt, codpiece and shoulder of the Force Unleashed Phase 3 Clone armour:
The belt combined pre existing TK belt base with some basic blocks and some "flaps" I basically digitally cut from a sheet. Very crude.
Same story for the knee boxes, just random model shapes merged together
The codpiece was a basic TK codpiece from Thingiverse I stretched to get the proportions I wanted
While the shoulder pad was a scout trooper shoulder from Thingiverse I cut to form the shape I was after:
Then I tried to make parts from scratch for the first time:
It was way off but I proved to myself I could actually make something of my own.
I then improved on it with subsequent attempts:
And then made my own belt+boxes and back plate:
Then I made my own shoulder pad from scratch:
and new knee parts:
There was already a helmet file available online and the codpiece seemed unnecessary so I called it a day as I had everything I needed to convert a phase 1/2 clone figure into a phase 3 one to match the game:
So there was my first conversion kit. I also during this time built the confidence to try my first attempt at a blaster which I will share in the next post (might be close to image limit already)
My first models when I started out (due to basically knowing nothing about CAD/Digital modelling were mostly made by mixing existing parts together or adjusting the proportions of existing model such as the knee, belt, codpiece and shoulder of the Force Unleashed Phase 3 Clone armour:
The belt combined pre existing TK belt base with some basic blocks and some "flaps" I basically digitally cut from a sheet. Very crude.
![large_display__1_1_old_belt_back_234905.jpg large_display__1_1_old_belt_back_234905.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500046-large-display-1-1-old-belt-back-234905.jpg)
![large_display_untitled_234905.jpg large_display_untitled_234905.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500051-large-display-untitled-234905.jpg)
Same story for the knee boxes, just random model shapes merged together
![large_display_untitled3_234906.jpg large_display_untitled3_234906.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500047-large-display-untitled3-234906.jpg)
The codpiece was a basic TK codpiece from Thingiverse I stretched to get the proportions I wanted
![large_display_untitled4_234904.jpg large_display_untitled4_234904.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500048-large-display-untitled4-234904.jpg)
While the shoulder pad was a scout trooper shoulder from Thingiverse I cut to form the shape I was after:
![large_display__1_12_v2_shoulder_234868.jpg large_display__1_12_v2_shoulder_234868.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500049-large-display-1-12-v2-shoulder-234868.jpg)
Then I tried to make parts from scratch for the first time:
![large_display_p3b_234902.jpg large_display_p3b_234902.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500050-large-display-p3b-234902.jpg)
It was way off but I proved to myself I could actually make something of my own.
I then improved on it with subsequent attempts:
![large_display_absv2d_234901.jpg large_display_absv2d_234901.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500052-large-display-absv2d-234901.jpg)
And then made my own belt+boxes and back plate:
![large_display_beltfrontback_234898.jpg large_display_beltfrontback_234898.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500053-large-display-beltfrontback-234898.jpg)
![large_display_belt_boxes_1_234899.jpg large_display_belt_boxes_1_234899.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500054-large-display-belt-boxes-1-234899.jpg)
![large_display_belt_full_234899.jpg large_display_belt_full_234899.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500055-large-display-belt-full-234899.jpg)
![large_display_1_6_lower_back_1_234900.jpg large_display_1_6_lower_back_1_234900.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500056-large-display-1-6-lower-back-1-234900.jpg)
![large_display_bellybackbelt_1_234899.jpg large_display_bellybackbelt_1_234899.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500057-large-display-bellybackbelt-1-234899.jpg)
![large_display_bellybackbelt_2_234899.jpg large_display_bellybackbelt_2_234899.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500058-large-display-bellybackbelt-2-234899.jpg)
Then I made my own shoulder pad from scratch:
![large_display_1_1_old_phase_3_shoulder_v2_234903.jpg large_display_1_1_old_phase_3_shoulder_v2_234903.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500059-large-display-1-1-old-phase-3-shoulder-v2-234903.jpg)
and new knee parts:
![large_display_p3_knee_r_234870.jpg large_display_p3_knee_r_234870.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500060-large-display-p3-knee-r-234870.jpg)
![large_display_p3_knee_l_b_234869.jpg large_display_p3_knee_l_b_234869.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500061-large-display-p3-knee-l-b-234869.jpg)
There was already a helmet file available online and the codpiece seemed unnecessary so I called it a day as I had everything I needed to convert a phase 1/2 clone figure into a phase 3 one to match the game:
![large_display_emv7hzf_234906.jpg large_display_emv7hzf_234906.jpg](https://cdn.imagearchive.com/sideshowcollectors/data/attach/500/500062-large-display-emv7hzf-234906.jpg)
So there was my first conversion kit. I also during this time built the confidence to try my first attempt at a blaster which I will share in the next post (might be close to image limit already)
Last edited: